Display-type and Aisle-type Cargo Phone Number List

Lets get phone number list talk.
Post Reply
monira123
Posts: 1
Joined: Tue May 17, 2022 6:00 am

Display-type and Aisle-type Cargo Phone Number List

Post by monira123 »

Second, the roadway The difference from the display type is that the lane number needs to be defined first. The lane is the corridor between the left and right rows of goods. Warehouse workers can put on phone number list shelves and pick goods between the corridors. For example, 2A01, 2A02, and 2A03 represent from left to right respectively. The first, second and third lanes. Finally, define the phone number list grid in the same way as the display format. The slot code of the red grid in the following figure can be "2A01-04-36", which means "No. 1 lane in Area A on the 2nd floor + the second shelf on the right + from bottom to top 3 layers + 6th grid from left to right". 3. Create cargo spaces in batches There are often tens of thousands of slots in a WMS. It would be too much trouble to manually add these slots one by one.

So what is the phone number list simple way to create these tens of thousands of slots? The commonly used method is to add in batches. The following is an example of the display format. On the New Inventory Column page, select the warehouse area where the cargo column to be added is located, for example, select "2A"; Fill in the serial number of the cargo line, and you can Phone Number List choose continuous, odd or even numbers to generate serial numbers, such as "1-40"; Click [Submit] to confirm the creation of the inventory code. 2. Then define the phone number list shelves and shelves On the new cargo location page, select the warehouse area where the cargo column to be added is located (single choice), such as "2A"; Select the cargo column under the warehouse area (multiple choices), such as "2A01"; Fill in the shelf serial number, the sequence can be generated according to odd, even and continuous, such as "1-100";

Fill in the number of layers and grids of the phone number list shelves, such as "1-6 layers, 1-10 grids"; Click [Preview] to generate a preview matrix of the location code; Fill in the size, weight limit, volume limit and other required fields for the lot; Click [Submit] to confirm the creation of the location code. The above are the two most commonly used ways to define cargo location codes in e-commerce wms, as well as the specific implementation prototypes. Of course, there may be subtle differences in the phone number list code of the cargo location of different wms. Do not copy and copy, and make a detailed analysis of specific problems from the actual business. This article was originally published by Original in Everyone is a product manager. Reproduction is prohibited without permission The title image is from Unsplash, based on the CC0 protocol
Post Reply